Skip to content
2.4Ghz 300Mbps 200m Elevator
In stock

Hikvision DS-3WF0BC-2NT(B)2.4Ghz 300Mbps 200m Elevator

Also known as: DS-3WF0BC-2NT

The Hikvision DS-3WF0BC-2NT(B) is a wireless bridge designed for elevators, operating in the 2.4 GHz band over distances up to 200 m. Its 7 dBi antenna and RJ45 port make network connection straightforward, and passive PoE power simplifies installation. It is well suited to relaying signal between an elevator shaft and the building or an outdoor location.

416,906 UZS
1
Buy in 1 click
1
  • DeliveryDelivery within Tashkent in 1 hour
  • WarrantyOfficial warranty
  • InstallationFitted by a specialist

Key specifications

Product Dimensions (W × H × D)
90.8 mm × 187.87 mm × 57.87 mm (3.57'' × 7.39'' × 2.27'')
Package Dimensions (W × H × D)
256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38")
Net Weight
0.26 kg (0.57 lb) per device
Gross Weight
0.8 kg (1.76 lb)
Packing List
Wireless Bridge × 2,Power Adapter (12 VDC, 1 A) × 2,10/100 Mbps PoE Injector × 2,Binding Tape × 4,Quick Start Guide ×1
All specifications →
Product Dimensions (W × H × D)90.8 mm × 187.87 mm × 57.87 mm (3.57'' × 7.39'' × 2.27'')
Package Dimensions (W × H × D)256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38")
Net Weight0.26 kg (0.57 lb) per device
Gross Weight0.8 kg (1.76 lb)
Packing ListWireless Bridge × 2,Power Adapter (12 VDC, 1 A) × 2,10/100 Mbps PoE Injector × 2,Binding Tape × 4,Quick Start Guide ×1
Packing MethodPacking in pairs
Working Temperature-30 °C to 70 °C (-22 °F to 158 °F)
Working Humidity5% to 95% (no condensation)
Storage Temperature-40 °C to 80 °C (-40 °F to 176 °F)
Storage Humidity5% to 95% (no condensation)
Installation ModePole Mounting
Ingress ProtectionIP55
Power Consumption1.89 W for typical (1-ch 2MP IPC), Max. 3.7 W
Max. Transmission Rate Of Air Interface≤ 300 Mbps
Wireless StandardIEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps)
Working Frequency Band2400 MHz ~ 2483.5 MHz
Antenna Gain7 dBi
Antenna Angle(H) Beamwidth [3 dB] 65° (V) Beamwidth [3 dB] 65°
Transmitting Power23 dBm @11n MCS0 (Note: Transmitting power may vary with local regulations.)
Receiving Sensitivity-87±2 dBm @HT40 MCS0
Throughput RatePTP: ,30 Mbps/0.2 KM(HT40)
Network Interface2 × 10/100 Mbps RJ45 ports
LED IndicatorPower indicator,LAN indicator,Signal intensity indicator
ResetHardware resetting button
Power Supply12-24 VDC Passive PoE
Application FunctionIFM,IPM
Channel Width10/20/40 MHz
Channel SelectionAuto/manual selection
Security ModeWPA2-PSK
Security MechanismWireless network name hidden
Network ProtocolNTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging)
Management MethodHCP,iVMS-4200,Web,HPP
System LogSyslog,Control center information
UpgradeWeb,iVMS-4200,HCP,HPP
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Reboot device 2. Restore device 3. Display the topology information 4. Display the connection status between AP and CPEs, including signal intensity, backgroud noise, sending & receiving rate 5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power 6. Bridge alignment 7. Spectrum scanning
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
RadioEN 301 893,EN 300 440,EN 62311,EN 301 489-3,EN 301 489-17

Data comes from official Hikvision and other manufacturer documents and may differ after model updates.

Frequently asked questions

Similar products

All Wi-Fi bridges →