Skip to content
300Mbps Wireless N Ceiling Mount Access Point — 1/4
1 / 4
In stock

TP-Link EAP110300Mbps Wireless N Ceiling Mount Access Point

The TP-Link EAP110 is a ceiling-mount Wi-Fi access point delivering up to 300 Mbps on the 2.4 GHz band. Its two built-in omnidirectional 4 dBi antennas cover up to 60 m² and support 100+ clients, which suits offices, hotels and classrooms. It is powered via passive PoE 24 V and managed centrally through Omada SDN.

528,000 UZS
1
Buy in 1 click
1
  • DeliveryDelivery within Tashkent in 1 hour
  • WarrantyOfficial warranty
  • InstallationFitted by a specialist

Key specifications

Interface
1× 10M/100M Ethernet Port
Button
Reset
Power Supply
24V/0.5A Passive PoE (+4,5pins; -7,8pins. PoE Adapter Included)
Max. Power Consumption
2.8 W
Dimensions ( W x D x H )
7.5 × 6.7 × 1.2 in (189.5 × 170.5 × 29.7mm)
All specifications →
Interface1× 10M/100M Ethernet Port
ButtonReset
Power Supply24V/0.5A Passive PoE (+4,5pins; -7,8pins. PoE Adapter Included)
Max. Power Consumption2.8 W
Dimensions ( W x D x H )7.5 × 6.7 × 1.2 in (189.5 × 170.5 × 29.7mm)
AntennaInternal 2× 4 dBi Omni
MountingCeiling /Wall Mounting (Kits included)
Omada AppYes
Centralized Management• Omada Hardware Controller• Omada Software Controller
Cloud AccessYes. Require the use of an Omada on-premises controller.
LED ON/OFF ControlYes
Management MAC Access ControlYes
SNMPv1, v2c, v3
System Logging Local/Remote SyslogLocal/Remote Syslog
SSHYes
Web-based ManagementHTTP/HTTPS
L3 ManagementYes
Multi-site ManagementYes
Management VLANYes
Coverage650 ft² (60 ㎡) *
Concurrent Clients100+ **
Wireless Standards2.4 GHz: IEEE 802.11b/g/n
Frequency2.400 to 2.4835 GHz ISM
Signal Rate• 11n: Up to 300 Mbps (dynamic)• 11g: Up to 54 Mbps (dynamic)• 11b: Up to 11 Mbps (dynamic)
Wireless Functions• Multiple SSIDs (Up to 8 SSIDs)• Enable/Disable Wireless Radio• Automatic Channel Assignment• Transmit Power Control (Adjust Transmit Power on dBm) • QoS(WMM) • Seamless Roaming(802.11r) • Rate Limit • Reboot Schedule • Wireless Schedule • Wireless Statistics based on SSID/AP/Client
Wireless Security• Captive Portal Authentication • Access Control • Wireless MAC Address Filtering • Wireless Isolation Between Clients • SSID to VLAN Mapping • Rogue AP Detection • 802.1X Support • 64/128/152-bit WEP / WPA / WPA2-Enterprise,WPA-PSK / WPA2-PSK
Transmission Power• CE: 10-19 dBm (2.4GHz, EIRP) • FCC: 6-21 dBm (2.4GHz)
CertificationCE, FCC
Package Content• EAP110 • Passive PoE Adapter • Power Cord • Mounting Kits • Installation Guide
Environment• Operating Temperature: 0 ℃–40 ℃ (32 ℉–104 ℉) • Storage Temperature: -40 ℃–70 ℃ (-40 ℉–158 ℉) • Operating Humidity: 10%–90% RH non-condensing • Storage Humidity: 5%–90% RH non-condensing

Data comes from official Hikvision and other manufacturer documents and may differ after model updates.

Frequently asked questions