
TP-Link EAP725-WallBE5000 Wall Plate Wi-Fi 7 Access Point
The Tp-Link EAP725-Wall is a wall-plate Wi-Fi 7 access point with BE3600 support, delivering up to 688 Mbps on 2.4 GHz and 2882 Mbps on 5 GHz. It mounts into a standard wall box and uses two internal antennas, with 4K-QAM, MU-MIMO, Beamforming and Band Steering helping many clients stay connected at once. It suits offices, hotels and other high-density spaces, and it is managed centrally through the Omada SDN controller.
- DeliveryDelivery within Tashkent in 1 hour
- WarrantyOfficial warranty
- InstallationFitted by a specialist
Key specifications
- Interface
- • Uplink: 1× 2.5G Ethernet Port • Downlink: 1× 2.5G Ethernet Port + 3× Gigabit Ethernet Ports (Two Gigabit ports offer flexible PoE Out, providing either dual PoE or single PoE+ output.The PoE Out feature requires 802.3bt input.) #
- Physical Security Lock
- Yes
- Button
- Reset
- Power Supply
- 802.3at/bt PoE
- PoE Out
- With 802.3bt Input: • Supports dual PoE or single PoE+ output, with a 30W total power budget. With 802.3at Input: • Supports dual PoE output, with a 7W total power budget. • Limitation: If both ports are connected, one port will shut down automatically if either exceeds 3.5W.
| Interface | • Uplink: 1× 2.5G Ethernet Port • Downlink: 1× 2.5G Ethernet Port + 3× Gigabit Ethernet Ports (Two Gigabit ports offer flexible PoE Out, providing either dual PoE or single PoE+ output.The PoE Out feature requires 802.3bt input.) # |
|---|---|
| Physical Security Lock | Yes |
| Button | Reset |
| Power Supply | 802.3at/bt PoE |
| PoE Out | With 802.3bt Input: • Supports dual PoE or single PoE+ output, with a 30W total power budget. With 802.3at Input: • Supports dual PoE output, with a 7W total power budget. • Limitation: If both ports are connected, one port will shut down automatically if either exceeds 3.5W. |
| Max. Power Consumption | 46.8W with 30W PoE Out (Requires 802.3bt PoE++ Input) |
| Dimensions ( W x D x H ) | 6.6 × 3.4 × 1.1 in (167.8 × 86 × 28 mm) |
| Antenna | • 2.4 GHz: 2× 3 dBi • 5 GHz: 2× 5 dBi • Bluetooth: 1 × 1 dBi (Note: The gains above are the single-antenna peak gains) |
| Bluetooth | V5.2 |
| Mounting | Junction Box / Wall Mounting (Kits included) |
| Omada App | Yes ( V4.24 and above) |
| Centralized Management | • Omada Cloud-Based Controller • Omada Hardware Controller • Omada Software Controller |
| Cloud Access | Yes. Require the use of an Omada controller. |
| Email Alerts | Yes |
| LED ON/OFF Control | Yes |
| Management MAC Access Control | Yes |
| SNMP | v1, v2c, v3 |
| System Logging Local/Remote Syslog | System Log |
| SSH | Yes |
| Web-based Management | Yes |
| L3 Management | Yes |
| Multi-site Management | Yes |
| Management VLAN | Yes |
| Zero-Touch Provisioning | Yes. Require the use of an Omada Controller. |
| Coverage | 970 ft² (90 ㎡)** |
| Concurrent Clients | 250+* |
| Wireless Standards | IEEE 802.11 a/b/g/n/ac/ax/be |
| Frequency | 2.4 GHz and 5 GHz |
| Signal Rate | • 5 GHz: Up to 4323 Mbps † • 2.4 GHz: Up to 688 Mbps † |
| Wireless Functions | • MLO ‡ • 4K-QAM ‡ • Multi-RUs ‡ • 240 MHz Bandwidth ‡ • 16 SSIDs (Up to 8 SSIDs on each band) • Enable/Disable Wireless Radio • Automatic Channel Assignment • Transmit Power Control (Adjust Transmit Power on dBm) • QoS(WMM) • Seamless Roaming § • Beamforming • Rate Limit (Based on SSID/Client) • Load Balance • Airtime Fairness • Band Steering • Reboot Schedule • Wireless Schedule • RADIUS Accounting • MAC Authentication • Wireless Statistics • Static IP/Dynamic IP |
| Wireless Security | • Captive Portal Authentication § • Access Control • Wireless Mac Address Filtering • Wireless Isolation Between Clients • VLAN • Rogue AP Detection • WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise |
| Transmission Power | 4-23 dBm (2.4GHz) 4-24 dBm (5GHz, U-NII-1, U-NII-2A, U-NII-2C, U-NII-3/ISM) |
| Certification | FCC/CE/NCC/VCCI/JRF/BSMI/WFA |
| Package Content | • EAP725-Wall • Installation Guide • Mounting Kits |
| System Requirements | Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows 11, Linux |
| Environment | • Operating Temperature: 0–40 ℃ (32–104 ℉) • Storage Temperature: -30–70 ℃ (-22–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing • Operating &Storage Altitude: up to + 2000 m (6561 feet) |
Data comes from official Hikvision and other manufacturer documents and may differ after model updates.
The Tp-Link EAP725-Wall is a wall-plate Wi-Fi 7 access point with BE3600 support, delivering up to 688 Mbps on 2.4 GHz and 2882 Mbps on 5 GHz. It mounts into a standard wall box and uses two internal antennas, with 4K-QAM, MU-MIMO, Beamforming and Band Steering helping many clients stay connected at once. It suits offices, hotels and other high-density spaces, and it is managed centrally through the Omada SDN controller.
From the official Hikvision distributor: genuine product, official warranty and paperwork. Wholesale pricing for dealers and projects.
Frequently asked questions
Retail price is 1,584,000 UZS. Dealers, installers and multi-unit orders get a separate quote: send the quantity on Telegram (@Hikvisionnuz) or call +998 95 252 22 22.
We are the official Hikvision distributor: every unit has a serial number on the box and housing that can be checked with Hikvision, and it ships with an official warranty card.
It is in stock. Within Tashkent we deliver the same day, usually within an hour; regions get it by courier in 1–3 days.
Companies agree payment terms and paperwork with a manager on +998 95 252 22 22. Individuals pay in cash, Uzcard, Humo, Click or Payme.
Similar products
All Wi-Fi access points →






