Skip to content
2.4GHz 300Mbps 1km Wireless Bridge Kit
In stock

Hikvision DS-3WF1000-EI-2N(O-STD)2.4GHz 300Mbps 1km Wireless Bridge Kit

Also known as: DS-3WF1000-EI-2N

DS-3WF1000-EI-2N(O-STD) is a 2.4 GHz wireless bridge kit consisting of two units, supporting up to 300 Mbps. With 2×2 MIMO and a 7 dBi antenna, it links sites up to 1 km apart, delivering about 70 Mbps point-to-point at 1 km. IP55 protection and an operating range of −30 to +60 °C suit pole-mounted outdoor use, such as connecting cameras and remote facilities.

514,068 UZS
1
Buy in 1 click
1
  • DeliveryDelivery within Tashkent in 1 hour
  • WarrantyOfficial warranty
  • InstallationFitted by a specialist

Key specifications

Product Dimensions (W × H × D)
90.8 mm × 187.87 mm × 57.87 mm (3.57'' × 7.39'' × 2.27'')
Package Dimensions (W × H × D)
256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38")
Net Weight
0.26 kg (0.57 lb) per device
Gross Weight
0.9 kg (1.98 lb)
Packing List
Wireless Bridge × 2,Power Adapter (12 VDC, 1 A) × 2,10/100 Mbps PoE Injector × 2,Binding Tape × 4,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1
All specifications →
Product Dimensions (W × H × D)90.8 mm × 187.87 mm × 57.87 mm (3.57'' × 7.39'' × 2.27'')
Package Dimensions (W × H × D)256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38")
Net Weight0.26 kg (0.57 lb) per device
Gross Weight0.9 kg (1.98 lb)
Packing ListWireless Bridge × 2,Power Adapter (12 VDC, 1 A) × 2,10/100 Mbps PoE Injector × 2,Binding Tape × 4,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1
Packing MethodPacking in pairs
Working Temperature-30 °C to 60 °C (-22 °F to 140 °F)
Working Humidity5% to 95% (no condensation)
Storage Temperature-40 °C to 80 °C (-40 °F to 176 °F)
Storage Humidity5% to 95% (no condensation)
Installation ModePole Mounting
Ingress ProtectionIP55
Power Consumption1.8 W for typical (1-ch 2MP IPC), Max. 4.5 W
Max. Transmission Rate Of Air Interface≤ 300 Mbps
Wireless StandardIEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps)
Working Frequency Band2400 MHz ~ 2483.5 MHz
Antenna Gain7 dBi
Antenna Angle(H) Beamwidth [3 dB] 60°, (V) Beamwidth [3 dB] 50°
Transmitting Power22 dBm @11n MCS0 (Note: Transmitting power may vary with local regulations.)
Receiving Sensitivity-87±2 dBm @HT40 MCS0
Throughput RatePTP: 90 Mbps/0.2 KM(HT40),90 Mbps/0.5 KM(HT40),70 Mbps/1 KM(HT40),PTMP(1 to 4): 40 Mbps/1 KM(HT40)
Network Interface2 × 10/100 Mbps RJ45 ports
LED IndicatorPower indicator,LAN indicator,Signal intensity indicator
ResetHardware resetting button
Power Supply12-24 VDC Passive PoE
Application FunctionIFM,IPM
Channel Width10/20/40 MHz
Channel SelectionAuto/manual selection
Security ModeWPA2-PSK
Security MechanismWireless network name hidden
Network ProtocolNTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging)
Management MethodHCP,Web,iVMS-4200,HPP
System LogSyslog,Control center information
UpgradeWeb,iVMS-4200,HCP,HPP
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Reboot device 2. Restore device 3. Display the topology information 4. Display the connection status between AP and CPEs, including signal intensity, background noise, sending & receiving rate 5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power 6. Bridge alignment 7. Spectrum scanning
EMCCE-EMC(EN 55032, EN 50130-4, EN 55035, EN IEC 61000-3-2, EN 61000-3-3)
SafetyCB (IEC 62368-1),CE-LVD (EN 62368-1)
ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
RadioEN 301 489-17,EN 301 489-1, EN 61000-3-3, EN IEC 61000-3-2, EN 300 328, EN IEC 62311

Data comes from official Hikvision and other manufacturer documents and may differ after model updates.

Frequently asked questions